Switch Unit Removal; Loudspeaker Removal; G6Ns/G7Ns Board Removal; D1N/D3N Board Removal - Sony KDL-40Z5500 Service Manual

2-9. Switch Unit Removal

Push
Push
To remove the 'Switch Unit' push the top of the unit in the
shaded area in the photo and rotate in the direction of the
arrow. Then repeat the procedure on the bottom of the unit.

2-11. G6NS/G7NS Board Removal

Screws
To remove the 'G6NS/G7NS' board disconnect all the
connectors and then remove the 4 screws circled and ease
the board gently away from the back of the TV set.
Screw Part number(s) and Description(s)
2-580-592-01 SCREW, +PSW M3X8

2-10. Loudspeaker Removal

b
b
To remove the 'Loudspeakers' first disconnect the speaker
cables and then remove the screws circled.
Screw Part number(s) and Description(s)
(a) 2-580-592-01 SCREW, +PSW M3X8
(b) 2-580-640-01 SCREW, +BVTP2 4X16

2-12. D1N/D3N Board Removal

To remove the 'D1N/D3N' board disconnect all the
connectors and then remove the 2 screws circled and ease the
board gently away from the back of the TV set.
Note: Refer to page 4 - Hirose MDF61 connector.
Screw Part number(s) and Description(s)
2-580-592-01 SCREW, +PSW M3X8
- 13 -
a
b
b
Screws