Slow compression damping force
To increase the slow compression damping
force and thereby harden the compression
damping, turn the slow compression damp-
ing force adjusting screw in direction (a). To
decrease the slow compression damping
force and thereby soften the compression
damping, turn the adjusting screw in direction
(b).
5
(b)
1. Slow compression damping force adjusting screw
(a)
1
Slow compression damping force settings:
Minimum (soft):
18 click(s) in direction (b)
Standard:
13 click(s) in direction (b)
Maximum (hard):
1 click(s) in direction (b)
TIP
When adjusting the damping force settings,
turn the adjuster in direction (a) until it stops,
and then count the clicks in direction (b).
EWB00411
WARNING
These shock absorber assemblies contain
highly pressurized nitrogen gas. Read and
understand the following information be-
fore handling the shock absorber assem-
blies.
Do not tamper with or attempt to open
the cylinder assemblies.
5-31