After Arriving
●
1.
Swap the origin time zone time with the
destination time zone time.
Before swapping
After swapping
World Time
World Time Origin
Destination
Using CASIO WATCHES to Configure
l
Settings
Using Watch Operations to Configure
l
Settings
2.
Enable auto time adjustment.
Using the Watch in a Medical Facility or
l
Aircraft
3.
Adjust the time setting.
Triggering Immediate Time Adjustment
l
Watch Operation Guide 3543
The stopwatch measures elapsed time in
1/100-second units for the first hour, and in 1-
second units after that for up to 23 hours 59
minutes 59 seconds (24 hours).
Measuring Elapsed Time
1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
Elapsed time is shown in 1/100-second
●
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
First hour
Minutes, seconds,
1/100 seconds
3.
Press (A) to reset the measurement time
to all zeros.
Stopwatch
Start
Stop
Resume
Stop
After first hour
Hour, minute, second
Measuring a Split Time
1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
Pressing (A) displays the elapsed time
●
from the start of a race up to the point
when you pressed the button (split
time).
D
Start
A
Split
A
Split release
D
Stop
Elapsed time is shown in 1/100-second
●
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
First hour
After first hour
Minutes, seconds,
Hour, minute, second
1/100 seconds
3.
Press (A) to reset the measurement time
to all zeros.
24