Nikon COOLPIX 5700 Manual page 23

E The (Function) Button
By default, the
ing the camera menus. Press the
the selected User Set will appear in the top left of the monitor or viewfinder
(User Sets 1, 2, and 3 only). It will also appear in the control panel shutter-speed/
aperture display while the
By default, the camera is set to the automatic "point-and-shoot" mode, User
Set A. Menu settings for User Sets 1, 2, and 3 are stored separately. You can
create combinations of settings for User Sets 1, 2 and 3, and switch instantly
from one combination of settings to the other simply by selecting the desired
User Set ( 68).
In User Sets 1, 2, and 3, you can choose the function assigned to the
ton, making it possible to select the User Set or adjust white balance and
metering without accessing the camera menus, or to adjust flash and focus
mode without using the buttons on the camera (
Setting assigned to
User Set (default setting)
button can be used to choose a User Set without access-
button is pressed.
(Focus Mode)
(Speedlight Mode)
White Balance
Metering
button while rotating the command dial,
129).
button
but-
68
53
62
101
103
11