Table of Contents
Advertisement
• At the start screen, select
Menu
messages
and press Select.
Once you connect and the prerecorded greeting begins, follow the automated
instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called "dialing codes" into phone numbers such as
voice mail, and save the number to a 1-touch dialing location. Dialing codes instruct the
receiving system to pause, wait, bypass, or accept the numbers that follow them in the
dialing string.
Note: Voice mail services vary by service provider. The following instructions
are examples of common operations. Please check with your service provider for
specific instructions for using your voice mail service.
Write down voice mailbox number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Keep in mind
that each voice mail service may vary. However, it should look something like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press
pound key.
Be precise; you will need this information in Setup voice mail with dialing codes, 43.
Insert dialing codes
Press the * key repeatedly to cycle through dialing codes. Once the desired code appears
in the display, pause briefly and the code is inserted into the dialing string.
The following dialing codes are available:
Dialing
Indicates...
code
*
Bypasses a set of instructions.
>
Messages
>
Voice messages
>
39
Copyright © Nokia 2004
Messages (Menu 1)
Listen to voice
Advertisement
Table of Contents
