[Information OSD]
The [Information OSD] displays channel, signal source, resolution and (if available) programming data
on the screen upon the channel change.
1. On the [System] menu page, press
2. Select [On] or [Off], then press [SET] button to apply.
3. Press [OPTION] or [EXIT] button to leave this window.
[System Information]
This function displays the software version, the network
settings and the MAC address.
1. On the [System] menu page, press
[System Information], then press [SET] button. The system
information will appear.
2. Press [OPTION] or [EXIT] button to leave this window.
[Software Update]
This function is for service use only.
[Reset]
This function returns all OSD settings to their default settings. Password is also reset to default.
NOTE: This function is protected by a password.
1. On the [System] menu page, press
2. Press numeric buttons to enter the four digit password. The default password is "0000". Select [OK],
then press [SET] button.
3. Select [Yes], then press [SET] button. All the settings will return to the default value, then this module
will reboot.
button to select [Information OSD], then press [SET] button.
button to select
button to select [Reset], then press [SET] button.
English-11