Image Monitoring Via The Internet (Outdoor Monitoring) - JVC Everio R GZ-RX670 Detailed User Manual

Image Monitoring via the Internet
(OUTDOOR MONITORING)
You can monitor the images captured on the camera from the smartphone
via Internet connection.
* To use this function, it is necessary to prepare for an UPnP (Universal Plug
and Play) compatible wireless LAN router, and an internet connection from
which the global IP address can be obtained.
Recording of videos and still images may be performed while monitoring.
0
.
Setting Multiple Cameras in the Same Network ：
.
To set up multiple cameras, you need to fix the HTTP ports for each of the
0
cameras.
What You Need
Smartphone
0
Wireless LAN router that supports UPnP (use a product that has a Wi-Fi
0
certification logo)
To check whether UPnP is supported, please refer to the instruction manual
of the wireless LAN router in use.
Internet connection with an obtainable global IP address
0
* Global IP address is an IP address that is specific in all over the internet.
For more information, contact your internet service provider.
Memo :
Depending on the wireless LAN router in use and signal strength, you may
0
experience connection problems or slow connections.
When operating the zoom function using a smartphone, the response may
0
be slower compared to using the camera.
Setting (Once setting is done, start from the "Operation
o
Method" below)
Obtaining a Dynamic DNS (DDNS) Account
By obtaining a dynamic DNS account, this unit may be used on the web as
usual even if the IP address changes when making an access to this unit via
internet.
Only the JVC dynamic DNS service can be set on this camera.
0
To obtain (register) an account, perform the following steps.
1
Access the following URL from a browser and register for an account.
(Operation on a computer or smartphone)
https://dd3.jvckenwood.com/user/
Set your e-mail address as the username.
2
Check that you have received a confirmation e-mail to the address used
in registration, and access the URL stated in the e-mail.
(Operation on a computer or smartphone)
3
Set the username and password used in registration on the camera.
(Operation on this camera)
Generate the QR code, and register the username and password to the
camera.
4
Execute OUTDOOR MONITORING.
(Operation on this camera)
If "OUTDOOR MONITORING" is executed while dynamic DNS settings
are enabled, the camera will access the dynamic DNS server.
5
Tap "CAMERA NETWORK INFO." to check that the URL (WAN) is
displayed.
(Registration complete)
Caution :
Registration will be canceled if you do not access the dynamic DNS server
0
from the camera within 3 days.
Perform the registration again in this case.
Registration will not be complete if the username and password set on this
0
camera are incorrect. Be sure to check that they are correct.
Successful registration will be canceled too if you do not access the
0
dynamic DNS server for 1 year.
Creating a QR Code
Enter values in the required items for outdoor monitoring.
o
For details, refer to "OUTDOOR MONITORING" (A p. 165) .
Registering the access points (wireless LAN router) to this
unit
Wi-Fi Protected Setup (WPS) Registration
o
1
Tap "MENU".
(Operation on this camera)
≪PLAY
.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
TOP MENU
Wi-Fi
OFF
SETUP
.
3
Tap "Wi-Fi SETTING".
(Operation on this camera)
Wi-Fi
DIRECT
CONNECTION
.
4
Tap "ACCESS POINTS".
(Operation on this camera)
Wi-Fi SETTING
ACCESS POINTS
.
Using Wi-Fi
REC MENU
RECORD
SETTING
CONNECTION
SETTINGS
ACCESS POINT
CONNECTION
Wi-Fi SETTING
131