Philips Click & Style YS534/17 User Manual page 15

EngliSh
14
11 Reattach the shaving unit to the shaving attachment.
If the shaving unit cannot be reattached smoothly, check if you have positioned the
shaving heads properly and if the retaining rings are fixed properly.
Cleaning the body groomer attachment
1 Switch off the appliance.
2 If a trimming comb is still attached, remove it.
You can either push the trimming comb off the appliance or pull it off, depending on
how the comb is placed on the appliance.
3 Pull the body groomer foil off the appliance (Fig. 30).
4 Use the cleaning brush supplied to clean the inside of the body groomer
attachment and rinse the inside under the tap (Fig. 31).
5 Rinse the body groomer foil under the tap.
6 Shake off excess water and place the body groomer foil back into the
attachment.
Cleaning the beard styler attachment
1 Switch off the appliance.
2 Pull the comb off the beard styler attachment (Fig. 16).
3 Open the beard styler attachment (Fig. 32).
Dispose of the hairs in the garbage bin.
4 Rinse the beard styler attachment and the comb separately under a hot tap
for some time (Fig. 33).
5 Lubricate the trimmer teeth with a drop of sewing machine oil every
six months.
Storage
Note: Make sure the appliance and the attachments are dry before you store them.
1 Put the protection cap on the shaver after use to prevent damage and to
avoid dirt accumulation in the shaving heads (Fig. 34).
Note YS534: Store the shaver and all parts in the pouch.
2 Place a comb on the body groomer attachment for travelling or storage.