Table of Contents
Advertisement
CONNECTING YOUR TV
REGZA-LINK connection
You can control the basic functions of connected audio/video devices using the television's remote control
if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and
operations, see pages 61–62.
AV amplifier
Playback device
For the setup shown above, you will need three HDMI cables
(see page 9).
NOTE:
• If several devices are connected, the REGZA-LINK feature
may not operate properly.
• For proper operation, it is recommended that you use HDMI
cables with the HDMI Logo (
• The HDMI 4 (HDMI 3 for MV series) terminal is located at the
side of the television.
• This function is available with one PC and one AV amplifier.
This function is available when one PC and one AV amplifier
are connected separately. However, it may not operate
properly if the PC is connected via the AV amplifier.
Before controlling the device(s):
• After completing the above connections, set the REGZA-LINK
• The connected devices must also be set. For details, see the
• The REGZA-LINK feature uses CEC technology as regulated
)
• This feature is limited to models incorporating Toshiba's
10
Playback device
Setup menu as you desire (see page 61).
operation manual for each device.
by the HDMI standard.
REGZA-LINK. However, Toshiba is not liable for those
operations. Refer to individual instruction manuals for
compatibility information.
Advertisement
Table of Contents
