2 electrolux Share more of our thinking at www.electrolux.com CONTENTS Safety information Product description Control panel Use of the appliance Setting the water softener Use of dishwasher salt Use of detergent and rinse aid Multitab function SAFETY INFORMATION Before the installation and use, read this manual carefully: •...
Page 3
Always pull the mains plug. • Only for UK and Ireland. The appliance has a 13 amp mains plug. If it is necessa- ry to change the fuse in the mains plug, use a 13 amp ASTA (BS 1362) fuse . electrolux 3...
4 electrolux Service centre • Only a qualified person can repair or work on the appliance. Contact the service centre. • Use only original spare parts. To discard the appliance • To prevent the risk of injury or damage: – Disconnect the mains plug from the mains socket.
The related indicator comes on. Refer to 'Washing programmes'. Delay start button Press this button again and again to delay the start of the washing programme of 3, 6 or 9 hours. The related indicator comes on. electrolux 5...
6 electrolux Function buttons With these buttons you can: • Adjust electronically the level of the water softener. Refer to 'Setting the water soft- ener'. • Activate and deactivate the multitab func- tion. Refer to 'Multitab function'. • Activate and deactivate the rinse aid dis- penser (only with the multitab function on).
(A), the ad- justment goes to the next level. 6. Deactivate the appliance to confirm. If the water softener is set electronically to the level 1, the salt indicator stays off. electrolux 7 Water hardness ad- justment manually elec- troni-...
8 electrolux USE OF DISHWASHER SALT How to fill the salt container: 1. Turn the cap counterclockwise and open the salt container. 2. Fill the salt container with 1 litre of water (only for the first time you fill with salt).
• Put light items in the upper basket. Make sure that the items do not move. • Water droplets can collect on plastic items and non-stick pans. electrolux 9 to increase or...
10 electrolux SETTING AND STARTING A WASHING PROGRAMME Starting the washing programme without delay start 1. Activate the appliance. Make sure that the appliance is in setting mode. 2. Set the washing programme. • The related programme indicator stays on.
0.8 - 0.9 the quantity of dishes can change the consumption values. 2. Filter (A) has two parts. To disassemble the filter, pull them apart. electrolux 11 Programme description Water (litre) 8 - 17 15 - 16 10 - 11...
12 electrolux 3. Fully clean the parts with water. 4. Put the two parts of the filter (A) togeth- er and push. Make sure that they as- semble correctly in each other. 5. Remove the filter (B). 6. Fully clean the filter (B) with water.
– Serial number (S.N.) ... Possible cause The washing programme was not applicable for the type of load and soil. electrolux 13 Possible solution Clean the water tap. Contact your local water au- thority. Open the water tap. Clean the filter.
14 electrolux Problem Limescale particles on the dishes. There are streaks, whitish stains, or a bluish layer on glasses and dishes. Dry water drop stains on glasses and dishes. The dishes are wet. The dishes are wet and matt. Activating the rinse aid dispenser 1.
Recycle the materials with the symbol Put the packaging in applicable containers to recycle it. electrolux 15 220-240 V 2200 W 10 A 50 Hz 0,5 bar (0,05 MPa) 8 bar (0,8 MPa) max.