9 Reference information
9.1 Specifications
Parameter
Transportation/storage
conditions
Operation site
Maximum operating altitude
Noise
Protection provided by enclosure
Overvoltage category
Rated pollution applied
Other conditions
246
Requirement
Temperature: -25°C to 70°C
Humidity: 5% to 95% RH (no dew condensation)
Note:
When the above conditions cannot be satisfied, take appropriate
actions.
Indoor use
2000 m or lower
70 dB(A) or lower
Fast Lmax ≤60dB(A), and average Leq ≤ 54dB(A) (1 m from the instru-
ment)
IP21
Transient overvoltage category II
Pollution degree 2
1 Take into consideration the workflow and ancillary facilities when
planning the installation.
2 Any required construction and electricity/air conditioning work
must be completed prior to installation.
3 It is not desirable to have a heat source near the Amersham
Imager 680 air intakes, even if the other environmental require-
ments have been met.
4 Do not install the equipment near a window. Avoid direct sunlight.
Ensure blinds are attached to nearby windows.
5 Do not place objects near the power outlet to ensure easy access
to the power cord for disconnection in case of emergency.
Amersham Imager 680 Operating Instructions 29271308 AB