Page 1
15/10/2023 08:13 Jabra Pro 920 Mono How do I connect my Jabra Wireless headset with the Jabra GN1000 remote handset lifter (RHL) to my standard desk phone so I have remote call control using my headset? Connection: 1. Connect the AC adapter (supplied with the headset) to the headset base, and connect the other end to an electrical outlet.
Page 2
15/10/2023 08:13 Configuration: 1. Follow the setup instructions for your Jabra wireless headset. If the headset base requires manual configuration, set the Electronic Hook Switch setting to "RHL" and set the dial tone switch to position “A”. 2. Make a call to the headset. If the volume of your voice is too loud or quiet to the person you are calling, adjust the headset microphone volume until you achieve the optimum level.