Description Of The Appliance; Operating The Appliance - Electrolux EHP60060K User Manual

Description of the appliance

Cooking surface layout
1
145
mm
120/210
mm
6
Hob cooking zone control knob
Residual heat indicator
The residual heat indicator comes on when a
cooking zone is hot.

Operating the appliance

When a cooking zone operates, it hums
for a short time. This is typical of all ce-
ramic glass cooking zones and does not
show that the appliance operates incor-
rectly.
The heat setting
To increase the heat setting turn the knob
clockwise. To decrease the heat setting turn
the knob counter-clockwise. To switch off
turn the knob to the 0.
2
180
mm
145
mm
5 4
1
2
3
1 Single cooking zone 1200 W
2 Single cooking zone 1800 W
3 Control Knobs
4 Single cooking zone 1200 W
5 Residual heat indicators
3
6 Double ring cooking zone 750/2200 W
1 Assignment of control knobs
2 Heat setting (0-12)
3
Connection double ring cooking zone
Warning! Risk of burns from residual
heat!
Switching the outer rings on and off
You can match the effective heating surface
to the size of the cookware.
To switch on the outer ring turn the knob
clockwise, past a light resistance, to the
Then turn the knob counter-clockwise to the
necessary heat setting. To switch off turn the
knob to the 0.
Switch on the inside ring before you switch
on the outside ring.
electrolux 5
.