LG TH2518SSAV Owner's Manual page 26

Steam
• Press the Steam button to use steam.
• Steam is automatically selected under the
Allergy Care programme.
Time Delay
• You can set a time delay so that the washing
machine will start automatically and finish after
a specified time interval.
1
Press the POWER button.
2
Select a washing programme.
3
Press the Time Delay button to set the
required Delay time.
4
Press the START/PAUSE button.
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
load and other factors.
• Reservation can be made up to 18 hours by
1-hour interval up to 3 - 12 hours and 2-hour
interval for 12 - 18 hours.The Time Delay
cannot be set for less than 3 hours.
• To cancel the Time Delay function, press Time
Delay button repeatedly until the reservation
is canceled or press the POWER button to
turn off and on power.
Buzzer
1
Press the POWER button.
2
Select a washing programme.
3
Press the Buzzer button to set the Buzzer
function.
4
Press the START/PAUSE button
26
NOTE
• Once the Buzzer function is set, the setting is
memorized even after the power is turned off.
• If you want to turn the Buzzer off, simply
repeat this process.
Turbo Wash™
• Press the Turbo Wash™ button to save time
and energy by jet spray technology.
Soak
• Soak can be selected to wash heavily soiled
laundry by soaking in water for some time to
remove dirt and grime.
• When the soak is activated, the
illuminates.
• To activate the Soak option, press and hold
the Turbo Wash™ button for 3 seconds.
• To change the soak time on the display or
deactivate the Soak option, press the Turbo
Wash™ button while the Soak option is
activated.
NOTE
• While the Turbo Was option is activated, the
Soak option can not be set even if the Turbo
Wash™ button is pressed for 3 seconds.
Tub Dry
• Press the Tub Dry button to dry the empty tub
after a wash.
EN
icon