Table of Contents
Advertisement
Available languages
Available languages
7 Band EQ
Press and hold the
band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons
and each can be adjusted to a setting between -6 to +6 using the Up/Down buttons. (Make sure the Sound
mode is set to "Standard".)
Press and hold the
for about 5 seconds.
Bluetooth PAIR
Switch the Soundbar to Bluetooth pairing mode.
When you press the button, the LED display changes as shown below.
• Until pairing is complete, the Multicolor LED changes as Red → Green → Blue in turn.
LED
Indicator
p (Play / Pause)
You can also play or pause music by pressing the button in "USB" mode.
Up/Down/Left/Right
Press Up/Down/Left/Right on the button to select or set functions.
• Repeat
To use the Repeat function in "USB" mode, press the Up button.
• Music Skip
Press the Right button to select the next music file. Press the Left button to select the previous music
file.
• ID SET
Press and hold the Up button for 5 seconds to complete ID SET (when connecting to a wireless
subwoofer or wireless rear speakers).
(Info)
Press the button to display information about the current function. (See page 7.)
(Sound Control) button for about 5 seconds to adjust the sound for each frequency
5 Sec
(Sound Control) button
"150Hz"
→
→
Red
Green
Blue Blinks
PAIR
Pairing
SOUND
MODE
VOL
WOOFER
ENG - 11
7 Band EQ
Using the Left/Right buttos and each can be
adjusted to setting between -6 to+6.
"150Hz"
"300Hz"
"2.5kHz"
Connection is complete
"600Hz"
"1.2kHz"
"5kHz"
"10kHz"
Cyan Blinks X3
Advertisement
Chapters
Table of Contents
