Routine Service Intervals - Bartell Global B300 Owner's Manual

FORWARD COMPACTOR
OWNER'S MANUAL

ROUTINE SERVICE INTERVALS

Due to the nature and environment of use, plate compactors could be exposed to severe
operating conditions. Some general maintenance guidelines will extend the useful life of your
machine.
• The initial service for your compactor should be performed after 25 hours of use, at
which time your mechanic (or authorized repair shop) should complete all the
recommended checks in the schedule above. The chart on page 10 (Ten) is handy
for keeping a record of the maintenance performed and the parts used for servicing
your compactor.
• Regular service according to the schedule above will prolong the life of the plate
compactor and prevent expensive repairs.
• Keeping your plate compactor clean and free from debris is the single most important
regular maintenance operation, over and above the checks in the service schedule
above, that can be performed. After each use your compactor should be cleaned to
remove any dust and debris from the undercarriage and surrounding components.
Use of a power washer will make clean up quick and easy, especially if a non-stick
coating was applied prior to use.
• In the Service Schedule above, items that should be checked, replaced or adjusted
are indicated by "o" in the appropriate column. Not all plate compactor models
include the same features and options and as such not all service operations may
have to be performed. For ease of recording, place a checkmark through the "o"
when the item is complete. If an item is not required or not completed place an "x"
through the "o" in the box.
• All compactors have governed engine speed of 3600 rpm. See engine
manufacturer's manual for exact specifications. Care should be used when making
any adjustments to the compactor not to change the governed speed. Running the
engine at lower rpm's will result in a decrease of compaction force and lower travel
speed. It will create excessive "out-of-synch" vibrations resulting in poor compaction,
maneuverability, excessive wear to the machine, and discomfort to the operator.
• Failure to have your vibratory plate compactor regularly serviced and properly
maintained in accordance with the manufacturer's instructions will lead to premature
failure and void the warranty.
12
OI – B19014