1040 Wireless LAN card
For access, remove this FRU:
•
"1010 Bottom cover" on page 56
Removal steps of the wireless LAN card
Step
Screw (quantity)
2
M2 × L3 mm, flat-head, nylon-coated (1)
When installing: Attach the gray cable to the connector marked "MAIN" on the card, and attach the black
cable to the connector marked "AUX".
1050 Memory module
For access, remove this FRU:
•
"1010 Bottom cover" on page 56
This topic only applies to the memory module that is seated in the memory slot. The memory module of your
computer might be seated in the memory slot or soldered on the system board. If the memory module is
soldered on the system board, it cannot be replaced.
60
ThinkPad 11e 3rd Gen and ThinkPad Yoga 11e 3rd Gen Hardware Maintenance Manual
Torque
Color
Black
0.181 Nm
(1.85 kgf-cm)