Placement And Mounting - JVC TH-E431B Instruction Manual

2.1 channel soundbar with built-in subwoofer

Table of Contents

Available languages

Prepare the Remote Control

The provided remote control allows the Soundbar to be operated from a distance.

• Even if the remote control is operated within the effective range 6m (19,7 feet), remote

control operation may be impossible if there are any obstacles between the Soundbar and

the remote control.

• If the remote control is operated near other products which generate infrared rays, or if

other remote control devices using infrared rays are used near the Soundbar, it may operate

incorrectly. Conversely, the other products may operate incorrectly.

Replace the Remote Control Battery

• Press and slide the back cover to open the battery compartment of the remote control.

• Insert two AAA size batteries (included). Make sure the

match the

and

• Close the battery compartment cover.

Precautions Concerning Batteries

• Be sure to insert the batteries with correct positive

• Use batteries of the same type. Never use different types of batteries together.

• Either rechargeable or non-rechargeable batteries can be used. Refer to the precautions on

their labels.

• Be aware of your fingernails when removing the battery cover and the battery.

• Do not drop the remote control.

• Do not allow anything to impact the remote control.

• Do not spill water or any liquid on the remote control.

• Do not place the remote control on a wet object.

• Do not place the remote control under direct sunlight or near sources of excessive heat.

• Remove the battery from the remote control when not in use for a long period of time,

as corrosion or battery leakage may occur and result in physical injury, and/or property

damage, and/or fire.

• Do not use any batteries other than those specified.

• Do not mix new batteries with old ones.

• Never recharge a battery unless it is confirmed to be a rechargeable type.