Table of Contents
Advertisement
Audio
Cannot hear the desired audio.
Check the connections and the "Digital Audio
Output" settings. ( 11, 32)
When the unit is connected to an amplifier/
receiver with the 7.1ch AUDIO OUT
terminals, set "Analogue Multi Channel".
( 33)
To output audio from a device connected with
an HDMI cable, set "Audio Output" to "On" in
the Setup menu. ( 31)
When connecting this unit to a TV via an
HDMI VIDEO OUT and to an amplifier/
receiver via an HDMI AUDIO OUT, set
"HDMI(VIDEO) Output Mode" to "Automatic
( Video Only / Video+Audio )". ( 11, 30)
Even when gapless playback is performed for
an album or similar group of songs containing
a sound source recorded at a live
performance or concert (a music file
containing songs that are recorded
continuously), the playback is interrupted
between songs.
In the following cases, playback is interrupted
between songs:
– When the file contains recordings that differ
from one another in their settings, such as
file format, sampling frequency, and
channel number
– When files of 100 or more songs are
contained in a single folder
The volume of audio output from the analogue
AUDIO OUT terminals is too high or too low.
Adjust the volume of the analogue AUDIO
OUT terminals in "Analogue Volume (dB)" in
the Option menu. ( 29)
Cannot output audio with a sampling
frequency higher than 192 kHz from the HDMI
AUDIO OUT/OPTICAL/COAXIAL terminal.
On this unit, only the analogue AUDIO OUT
terminals support output of audio with a
sampling frequency higher than 192 kHz.
Connect to any of the analogue AUDIO OUT
terminals to output audio with a sampling
frequency higher than 192 kHz.
Reference
There is no sound coming out.
To output audio using OPTICAL/COAXIAL
terminal, set "OPTICAL / COAXIAL Down
Sampling" properly. ( 32)
Refer to "Connecting to an amplifier/receiver"
( 11 - 16) to check the audio output settings
suited to the connections of your device.
In the following cases, audio is not output
from the terminals listed below:
≥HDMI VIDEO OUT terminal
– When a device is connected to the HDMI
AUDIO OUT terminal and "HDMI(VIDEO)
Output Mode" is set to "Automatic ( Video
Only / Video+Audio )" ( 30)
– When "Audio Output" in "Advanced
Settings" is set to "Off" ( 31)
– While playback is being performed with
"Audio Output" in "Settings for High Clarity
Sound" set to "OPTICAL / COAXIAL Only"
or "Analogue Only" ( 33)
– When "Analogue Multi Channel" is set to
"On" ( 33)
≥HDMI AUDIO OUT terminal
– When "Audio Output" in "Advanced
Settings" is set to "Off" ( 31)
– While playback is being performed with
"Audio Output" in "Settings for High Clarity
Sound" set to "OPTICAL / COAXIAL Only"
or "Analogue Only" ( 33)
– When "Analogue Multi Channel" is set to
"On" ( 33)
≥OPTICAL/COAXIAL terminal
– When a device is connected to the HDMI
AUDIO OUT terminal and "Audio Output" in
"Advanced Settings" is set to "On" ( 31)
– While playback is being performed with
"Audio Output" in "Settings for High Clarity
Sound" set to "HDMI Only" or "Analogue
Only" ( 33)
≥2ch AUDIO OUT terminals
– When a device is connected to the HDMI
AUDIO OUT terminal and "Audio Output" in
"Advanced Settings" is set to "On" ( 31)
– While playback is being performed with
"Audio Output" in "Settings for High Clarity
Sound" set to "HDMI Only" or "OPTICAL /
COAXIAL Only" ( 33)
- 40 -
Advertisement
Table of Contents
