Tuning Analogue Television Channels - Grundig 32 GEH 4820 E Brief Instruction

DETAILED­CHANNEL­SETTINGS
Tuning­analogue­television­
channels
This setting is only necessary if you have not
carried out an analogue search during the first
time installation.
The television channel can be set directly or
using the search.
Switching­the­television­to­analogue­
channels
Note:
Analog channels can only be selected
7
while »Air« or »Cable« sources are active.
1­
Open the »Input Source« menu with »
2­
Select »ATV« using »
confirm with »OK«.
Note:
Additional operations are explained in the
7
following sections.
Re-tuning­all­analogue­television­
channels
Note:
Plug the rooftop antenna cable (for
7
analogue television stations) into the RF­IN­
T2 socket on the television.
1­ Press »MENU« to open the menu.
< >
2­ Press » « or » « to select the »CHANNEL«
menu and press »OK« to confirm.
– » CHANNEL« menu is now enabled.
3­
Select »Auto Tuning« with »
confirm with »OK«.
– » Tuning Setup« menu will be displayed.
« or » « and
V Λ
« or » « and
V Λ
­----------------------------------------------------
Country
Tune Type
Scan type
Scan Type
Network ID
Frequency
Symbol Rate
Back
MENU
«.
4­
Select »Tune Type« with»
select »ATV« with »
5­
Go to »Country« with »
select the country with »
6­ Press »OK« to start the search.
– T he »Channel Tuning« menu will be
displayed and the search for TV channels
will start.
– S earch may take several minutes
depending on the number of television
channels received.
Note:
The search can be aborted with »EXIT«.
7
7­
Press »EXIT« to end searching.
Tuning Setup
Turkey
ATV
DVB-T
Full
Auto
Auto
Auto
Start
ENTER
« or »
V
< >
« or » «.
« or »
V Λ
< >
« or »
ENGLISH
« and
Λ
« and
«.
49­