TP-Link Tapo T315 - Smart Temperature and Humidity Sensor Quick Start Guide

Appearance

*You can press the button to switch display position.

Indicator Icons

Connection

• Blinking: Connecting to hub
• Solid On: Connected to hub
• Off: No connection

Battery Level
Battery level < 20%
Battery level < 5%

Inside Comfort Level
Outside Comfort Level
The default comfort level is temperatures between 20℃ (68℉) - 26℃ (78.8℉) while humidity is between 30% - 60%. You can customize the comfort level on the Tapo app.

Display/Reset Button

• Single Press
  Switch the temperature unit ℃/℉.
• Double Press
  Switch the display position of temperature and humidity.
• Press and hold for 5s
  Reset your monitor to enter pairing mode.

Before You Start

A Tapo Hub is required. Make sure your Tapo Hub is successfully added via the Tapo app.

OR

Power Up Your Monitor

Remove the back panel and insert the batteries. The screen will light up.

Set Up Your Monitor

Open the Tapo app and tap the button. Select Sensors and then your model.
Follow the app instructions to complete setup.

Test Your Monitor

Take the monitor to your preferred location. Make sure the Connection icon on the screen is solid on. If there is no connection icon, move it closer to your hub.

Place Your Monitor

(The installation height should not be higher than 2 meters.)
Option 1: Place it on a table or a shelf

Option 2: Magnetically attach to metallic surfaces

Option 3: Stick to a clean wall with the included adhesive

For technical support, the user guide and more information, please visit https://www.tapo.com/support/

Risk of explosion if the battery is replaced by an incorrect type.

Avoid replacement of a battery with an incorrect type that can defeat a safeguard.
Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Operating Temperature: 0℃ (32℉) - 50℃ (122℉)
Please keep it away from harsh environments with high temperatures or high humidity.
Do not immerse the vent hole into any liquid.
This monitor is designed to facilitate a healthy lifestyle, but should not be used as a measuring tool.