Cooler Master SH711 - Headphones Setup Guide

BLUETOOTH CONNECT

1. ANC Mode Indicator
2. ANC Mode Selection
3. Multi-Function Button (MFB)
4. Bluetooth Status Indicator

Function	Instruction / Description	LED Status	Voice Prompt
Power On	Press "MFB" for 2 Seconds	Blue LED Flashes Once	POWER ON
Pairing	After Power On, DO NOT release "MFB" and keep pressing for 2 Seconds more.	Blue LED and Red LED Flash alternately	PAIRING
Pairing Successful	While in Pairing Mode	Blue LED Steady	PAIRING SUCCESSFUL, CONNECTED
Reconnect	With Pairing completed successfully, power on and connect automatically.	Blue LED Steady	CONNECTED
Reconnect Fail	Will enter pairing mode automatcially.	Blue LED and Red LED Flash alternately	PAIRING
Connect and Pairing Fail	Connect fail and will enter Pairing Mode automatically. Auto power off if pairing fails for 5 minutes.		PAIRING FAILED, POWER OFF
Disconnected	Will enter standby mode, please press "MFB" to reboot connection or to enter pairing mode	Blue LED flashes twice every 1s interval	DISCONNECTED
Reboot Connection	Double press "MFB"	Blue LED Steady	CONNECTED
Eliminate Headset Pairing Record	Under connected mode (before playing any media), triple press "MFB" to eliminate saved pairing devices and then enter pairing mode.	Blue LED and Red LED Flash alternately	DISCONNECTED, PAIRING
Power Off	Press "MFB" for 4 Seconds.	Red LED flash once	POWER OFF

TOUCH CONTROL

Touch Panel is on the LEFT Side
Touch Panel is controlled by Bluetooth Mode

Audio Play/Pause

Double tap to play or pause music

Next Track

Slowly swipe forward for next song

Previous Track

Slowly swipe backward for previous song

Volume Up

Slowly swipe up to increase volume

Volume Down

Slowly swipe down to decrease volume

Call Answer / End

Single tap to answer or end the call

Call Decline

Double Tap to decline the incoming call

CHARGING LED

Charging indicator is on the RIGHT side

6. Charging Indicator

Function	LED Status	Voice Prompt
Low Battery	Red LED slow flash	BATTERY LOW "Every 3 Minutes"
Charging "Auto Power Off while charging, able to power on Manually"	Under Power Off Red LED Steady
Charging Complete	Under Power Off Blue LED Steady

LINE IN

ANC is disabled while Headset is powered off MIC function is disabled while line in

5. 3.5mm Audio Jack
6. Charging Indicator
7. USB Type C Input

Safety instructions

• Read these operating instructions carefully and completely before using the product.
• Do not use the product when it is damaged.

Preventing damage to health and accidents

• When you use the headphones, please make sure that the volume level is set to minimum. Adjust the volume level only after putting on the headphones. To avoid possible hearing damage, do not use your headphones for extended periods of time at high volume.
• High volumes and long listening times can damage your hearing. Hearing damage is irreversible.
• If you suffer from tinnitus, do not use headphones or reduce the volume.
• Always ensure an adequate volume level. It is advisable to keep listening times as short as possible at high volume levels.

Danger to your person

• Headphones drastically reduce perception of external sounds. Using headphones in road traffic can be potentially dangerous. The user's hearing must not be impaired to the extent that it causes road safety risks. For your safety, please do not use the headphones in traffic, especially within an area of potentially dangerous machines and tools.
• Furthermore, avoid using headphones in situations where hearing must not be affected, especially at railway crossings or construction sites.

ANC function

• The function of Active Noise Cancellation (ANC) prevents users from hearing ambient noise. In road traffic, this can be extremely hazardous.
• Never use headphones with Active Noise Cancellation (ANC) in situations where hearing may not be impaired and may present a risk to yourself or others, such as when cycling, driving a car, crossing a road or walking near traffic, contruction site etc.
• Remove the headphones or use the headphones without noise cancellation and adjust the volume to make sure that you can hear ambient noise such as alarms or warning signals.
• Please note that sounds that you rely on as alarms or warning signals may sound different when using headphones.

Liability / intended use

• Do not use the product for any application which is not described in this product information. Cooler Master is not liable for improper use of the product and its accessories.
• Cooler Master is not liable for damages to USB devices that do not comply with USB specifications.
• Cooler Master is not liable for damages resulting from transmission breakdowns due to empty or old batteries or exceeding the Bluetooth® transmission range.
• Please observe the respective country-specific regulations before using the product.

Unit usage warning

• Use only a USB 2.0/3.0 compliant 5V power supply to charge the battery via the integrated USB type-C port(power consumption is max. 1.0 A).
• 
  The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
• 
  Please do not open the housing. Danger of explosion if battery is incorrectly replaced.

Battery warning

• Do not disassemble.
• Do not use the battery after soaking.
• Do not expose to high temperature (60°C/140°F). High temperatures, particularly in association with a high charging status, result in irreversible damage of the battery.
• If you are not intending to use the battery for an extended period or are planning to put it into storage, it is advisable to lower the battery's charging level to around 50% and to store it at temperatures of maximum 30°C.
• Never expose the battery to excessive heat such as sunshine, fire or the like.
• Misuse or improper use could damage the battery. In extreme cases, there is a risk of explosion, heat, fire, smoke or gas.

Notes on battery life for Li-ion batteries

• After fully charging, disconnect the charging cable from the charger and the headphones.
• High temperatures, especially when fully charged can lead to irreversible damage.
• If the battery is not used for extended periods of time, it is recommended to charge it to approx. 50% and store it at temperatures no more than 20°C.
• Turn-off the battery-powered product after use.

Battery disposal
When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

• Old batteries may contain substances that are harmful to your health and environment.
• Dispose used batteries always according to the applicable disposal regulations. Please do not throw used battery packs into the fire (danger of explosion) or your household rubbish, take them to your local collection points.

Technical specifications

Trademarks
The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc. and all use of these trademarks by Cooler Master is licensed. Other trademarks and trade names are the property of the respective owners.
Qualcomm aptX™ is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm® is a registered trademark of Qualcomm Incorporated in the USA and in other countries. aptX™ is a registered trademark of Qualcomm Technologies International, Ltd.