Table of Contents
Advertisement
Manual Open Network Settings (Wired)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the
DNS server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
" The path to the settings depends on the installed OS.
IP
Address,
Subnet
Mask,
Gateway
and
How to set up manually
1
Select
Open Network
Settings. The
2
The network test screen appears and the verification process starts. Press Cancel. The
verification process stops.
3
Select
IP Settings
on network connection screen. The
4
Select the field at the top, press E, and then set
entry process for each field in the
IP
" Setting
IP Setting
to
Enter manually
manually.
5
When done, select
OK
at the bottom of the page, and then press E. The network test
screen appears and the verification process starts.
6
When the connection has been verified, the
Internet. If you have any problems using online services, please contact your Internet
service
provider." message appears.
Open Network Settings
session starts.
IP Settings
screen appears.
IP Setting
to
Enter
manually. Repeat the
Address.
automatically changes
DNS Setting
"Success! Your device is connected to the
to
Enter
80
Advertisement
Table of Contents
