Attaching/Removing The Base - Acer CB342CU User Manual

Attaching/removing the base

Installation: Align the base with the stand and push the base towards the top of the monitor, and
then rotate the base clockwise. Tighten the screw clockwise.
Remove: Reverse the steps to remove the base.
Note: Take care when performing the installation to avoid injuring yourself.
If installing with a wall mounting kit, install 2 extension columns into the copper stud in the back
cover (as below picture),it is recommended to use VESA mounting kit(100x100) with M4x14(L)mm
screws to fix your monitor on the wall.
2