Group 3 Tests And Adjustments Group 4 Disassembly And Assembly SECTION 6 WORK EQUIPMENT Group 1 Structure And Function 2. Hydraulic Circuit (hl940 T3, Hl940xt T3) Group 2 Operational Checks And Troubleshooting Group 3 Tests And Adjustments Group 4 Disassembly And Assembly...
CONTENTS CONTENTS SECTION 1 GENERAL SECTION 1 GENERAL Group 1 Safety Hints ------------------------------------------------------------------------------------------------------- 1-1 Group 2 Specifications ---------------------------------------------------------------------------------------------------- 1-10 Group 3 Operational Checkout Record Sheet -------------------------------------------------------------- 1-24 SECTION 2 ENGINE SECTION 2 ENGINE Group 1 Structure and Function ------------------------------------------------------------------------------------ 2-1 Group 2 Engine speed and Stall rpm ---------------------------------------------------------------------------- 2-6 SECTION 3 POWER TRAIN SYSTEM SECTION 3 POWER TRAIN SYSTEM...
Page 4
SECTION 7 ELECTRICAL SYSTEM SECTION 7 ELECTRICAL SYSTEM Group 1 Component Location --------------------------------------------------------------------------------------- 7-1 Group 2 Electrical Circuit ------------------------------------------------------------------------------------------------ 7-3 Group 3 Electrical Component Specification ---------------------------------------------------------------- 7-22 Group 4 Connectors -------------------------------------------------------------------------------------------------------- 7-29 Group 5 Troubleshooting ------------------------------------------------------------------------------------------------- 7-62 Find manuals at https://best-manuals.com...
The specifications contained in this shop manual are subject to change at any time and without any advance notice. Contact your Hyundai distributor for the latest information. Find manuals at https://best-manuals.com...
Page 6
Revised edition mark (①②③…) Any additions, amendments or other changes When a manual is revised, an edition mark is will be sent to HYUNDAI distributors. recorded on the bottom outside corner of the Get the most up-to-date information before you pages.
Page 7
3. CONVERSION TABLE 3. CONVERSION TABLE Method of using the Conversion Table The Conversion Table in this section is provided to enable simple conversion of figures. For details of the method of using the Conversion Table, see the example given below. Example Example Method of using the Conversion Table to convert from millimeters to inches...
Page 12
TEMPERATURE TEMPERATURE Fahrenheit-Centigrade Conversion. A simple way to convert a fahrenheit temperature reading into a centigrade temperature reading or vice verse is to enter the accompanying table in the center or boldface column of figures. These figures refer to the temperature in either Fahrenheit or Centigrade degrees. If it is desired to convert from Fahrenheit to Centigrade degrees, consider the center column as a table of Fahrenheit temperatures and read the corresponding Centigrade temperature in the column at the left.
SECTION 1 GENERAL SECTION 1 GENERAL Group 1 Safety Hints --------------------------------------------------------------------------------------------------------1-1 Group 2 Specifications -----------------------------------------------------------------------------------------------------1-10 Group 3 Operational Checkout Record Sheet ---------------------------------------------------------------1-24...
SECTION 1 GENERAL SECTION 1 GENERAL GROUP 1 SAFETY HINTS GROUP 1 SAFETY HINTS FOLLOW SAFE PROCEDURE FOLLOW SAFE PROCEDURE Unsafe wor k practices are dangerous. Understand service procedure before doing work; Do not attempt shortcuts. WEAR PROTECTIVE CLOTHING WEAR PROTECTIVE CLOTHING Wear close fitting clothing and safety equipment appropriate to the job.
Page 15
PREPARE FOR EMERGENCIES PREPARE FOR EMERGENCIES Be prepared if a fire starts. Keep a first aid kit and fire extinguisher handy. Keep emergency numbers for doctors, ambulance ser vice, hospital, and fire department near your telephone. 73031GE03 WORK IN CLEAN AREA WORK IN CLEAN AREA Before starting a job : ・...
Page 16
PARK MACHINE SAFELY PARK MACHINE SAFELY Before working on the machine: ・ Park machine on a level surface. ・ Lower bucket to the ground. ・ Turn key switch to OFF to stop engine. Remove key from switch. ・ Move pilot cut off switch to locked position. ・...
Page 17
Store flammable fluids away from fire hazards. Do not incinerate or puncture pressurized containers. Make sure machine is clean of trash, grease, and debris. Do not store oily rags ; They can ignite and burn spontaneously. 73031GE09 BEWARE OF EXHAUST FUMES BEWARE OF EXHAUST FUMES Prevent asphyxiation.
Page 18
ILLUMINATE WORK AREA SAFELY ILLUMINATE WORK AREA SAFELY Illuminate your work area adequately but safely. Use a portable safety light for working inside or under the machine. Make sure the bulb is enclosed by a wire cage. The hot filament of an accidentally broken bulb can ignite spilled fuel or oil.
Page 19
AVOID HIGH PRESSURE FLUIDS AVOID HIGH PRESSURE FLUIDS Escaping fluid under pressure can penetrate the skin causing serious injury. Avoid the hazard by relieving pressure before disconnecting hydraulic or other lines. Tighten all connections before applying pressure. Search for leaks with a piece of cardboard. Protect hands and body from high pressure 73031GE14 fluids.
Page 20
PREVENT ACID BURNS PREVENT ACID BURNS Sulfuric acid in battery electrolyte is poisonous. It is strong enough to burn skin, eat holes in clothing, and cause blindness if splashed into eyes. Avoid the hazard by: Filling batteries in a well-ventilated area. Wearing eye protection and rubber gloves.
Page 21
SERVICE TIRES SAFELY SERVICE TIRES SAFELY Explosive separation of a tire and rim parts can cause serious injury or death. Do not attempt to mount a tire unless you have the proper equipment and experience to perform the job. Always maintain the correct tire pressure. Do not inflate the tires above the recommended pressure.
Page 22
REPLACE SAFETY SIGNS REPLACE SAFETY SIGNS Replace missing or damaged safety signs. See the machine operator's manual for correct safety sign placement. 73031GE21 LIVE WITH SAFETY LIVE WITH SAFETY Before returning machine to customer, make sure machine is functioning properly, especially the safety systems.
GROUP 2 SPECIFICATION GROUP 2 SPECIFICATION 1. MAJOR COMPONENT 1. MAJOR COMPONENT Hydraulic tank Radiator Bucket Tire Head light Boom Boom cylinder Main control valve Battery Counterweight Engine Main pump Bell crank Bucket cylinder Air cleaner Bucket link Front axle Steering cylinder Transmission Rear axle...
Page 24
2. SPECIFICATIONS 2. SPECIFICATIONS 1) 1) WITH BOLT-ON CUTTING EDGE TYPE BUCKET WITH BOLT-ON CUTTING EDGE TYPE BUCKET (HL940 T3) 940A2SE03 Description Unit Specification Operating weight kg (lb) 13200 (29105) Struck 2.0 (2.6) Bucket capacity Heaped 2.3 (3.0) Overall length 7600 (24' 11")
Page 25
WITH BOLT-ON CUTTING EDGE TYPE BUCKET WITH BOLT-ON CUTTING EDGE TYPE BUCKET (HL940XT T3) 940A2SE03-2 Description Unit Specification Operating weight kg (lb) 13645 (30085) Struck 2.0 (2.6) Bucket capacity Heaped 2.3 (3.0) Overall length 8190 (26' 10") Overall width 2600 (8' 6") Overall height 3300 (10' 10") Ground clearance...
Page 26
WITH BOLT-ON CUTTING EDGE TYPE NARROW BUCKET WITH BOLT-ON CUTTING EDGE TYPE NARROW BUCKET (HL940 T3) 940A2SE02 Description Unit Specification Operating weight kg (lb) 13160 (29015) Struck 1.8 (2.4) Bucket capacity Heaped 2.1 (2.7) Overall length 7560 (24' 10") Overall width 2550 (8' 4")
Page 27
WITH BOLT-ON CUTTING EDGE TYPE WITH BOLT-ON CUTTING EDGE TYPE NARROW NARROW BUCKET BUCKET (HL940XT T3) 940A2SE02-1 Description Unit Specification Operating weight kg (lb) 13605 (30000) Struck 1.8 (2.4) Bucket capacity Heaped 2.1 (2.7) Overall length 8150 (26' 9") Overall width 2550 (8' 4") Overall height 3300 (10' 10")
Page 29
4. SPECIFICATION FOR MAJOR COMPONENTS 4. SPECIFICATION FOR MAJOR COMPONENTS 1) 1) ENGINE ENGINE Item Specification Model HYUNDAI HE6.7 Type 4-cycle turbocharged, charge air cooled diesel engine Control type Electronic control Cooling method Water cooling Number of cylinders and arrangement...
Page 31
7) 7) DYNAMIC POWER TRANSMISSION DEVICES DYNAMIC POWER TRANSMISSION DEVICES Item Specification Model ZF 4WG160 Torque converter Type Single-stage, single-phase Ratio 2.302 : 1 Type Full-automatic power shift Transmission Gear shift Forward fourth gear, reverse third gear Control Electrical single lever type, kick-down system Drive devices 4-wheel drive Axle...
Page 33
6. TORQUE CHART 6. TORQUE CHART Use following table for unspecified torque. 1) 1) BOLT AND NUT BOLT AND NUT (1) (1) Coarse thread Coarse thread 8.8T 10.9T 12.9T Bolt size kgf·m lbf·ft kgf·m lbf·ft kgf·m lbf·ft M 6 × 1.0 0.8 ~ 1.2 5.8 ~ 8.6 1.2 ~ 1.8...
Page 34
2) 2) PIPE AND HOSE PIPE AND HOSE (FLARE type) Thread size Width across flat (mm) kgf・m lbf・ft 1/4" 28.9 3/8" 36.2 1/2" 68.7 3/4" 1" 1-1/4" 3) 3) PIPE AND HOSE PIPE AND HOSE (ORFS type) Thread size Width across flat (mm) kgf・m lbf・ft 9/16-18...
Page 35
※ Do not mix HYUNDAI genuine oil with any other lubricating oil as it may result in damage to the systems of Do not mix HYUNDAI genuine oil with any other lubricating oil as it may result in damage to the systems of major components.
GROUP 3 OPERATIONAL CHECKOUT RECORD SHEET GROUP 3 OPERATIONAL CHECKOUT RECORD SHEET ・Owner ・Date ・Hours ・Serial No. ・Technician ※ Use this sheet to record operational Use this sheet to record operational checkout results. checkout results. Perform the operational check before Perform the operational check before installing any test equipment.
Page 38
4. Brake system and clutch cut off checks 4. Brake system and clutch cut off checks □ □ ・ Park brake capacity check □ □ ・ Park brake transmission lockout check □ □ ・ Service brake pump flow check □ □...
Page 39
7. Steering system checks 7. Steering system checks □ □ ・Steering unit check □ □ ・Steering system leakage check ・Steering valve (EHPS) □ □ Low check pressure □ □ High check pressure 8. Accessory checks 8. Accessory checks □ □ ・Operating lights check □...
SECTION 2 ENGINE SECTION 2 ENGINE Group 1 Structure and Function -------------------------------------------------------------------------------------- 2-1 Group 2 Engine speed and Stall rpm ----------------------------------------------------------------------------- 2-6...
Page 41
This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...