Table of Contents
Advertisement
PlayFiDevice 1234
PlayFiDevice 1234
Your Play-Fi device is connecting to
Your Play-Fi device is connecting to
Your Home Router
Your Home Router
When the Wi-Fi light on the device stops
blinking and becomes solid the device is
When the Wi-Fi light on the device stops
setup and ready to be used.
blinking and becomes solid the device is
setup and ready to be used.
6
After successful Wi-Fi connection, the
Wi-Fi light indicator will stop pulsing
and turn solid. Once you set up this
product on your Wi-Fi network, you
can control it from any smartphone or
tablet on the same network.
7
After connection, you can change
the device name. There are several
names to choose from or create your
own by choosing Custom Name at
the end of the name list. Otherwise,
it follows the default name.
8
After connection, this product may
perform a software update.
Upgrade to the latest software
when it is your first time set up.
The software upgrade may take
several minutes. Do not unplug your
speaker, turn off your device, or leave
the network during the update.
Note
•
After connection, the product may perform
a software update. Upgrade is required after
initial set up. Without the upgrade, not all
product features can be available.
•
When the first time set up is not successful, hold
down the
(Wi-Fi) button on the soundbar
for 8 seconds until the second tone can be
heard and the Wi-Fi light is changed to a slow
pulse. Reset the Wi-Fi connection, restart the
app and start the set up again.
•
If you want to change from one network to
another, you need to set up the connection
again. Press hold down the
on the soundbar for 8 seconds to reset the Wi-Fi
connection.
•
When the first time set up is not successful,
please close the Philips Sound app powered by
DTS Play-fi. Restart the app and try the setup
again.
Your Home Router
Your Home Router
X
X
Select Name
Select Name
X
X
Select Name
Select Name
Bedroom
Bedroom
(Wi-Fi) button
AirPlay setup
Use AirPlay to set up the Wi-Fi connection
of iOS device (iOS7 or later) and soundbar.
1
iOS device: Settings > Wi-Fi > select
home network【Play-fi device
(xxxxxx)】
» Go to the Wi-Fi set up. The Play-Fi
device name displays around in 5
seconds.
Settings
Settings
Settings
» Select the Play-Fi device in the
Airplay set up.
» Press "Done" when set up
complete
» After successful Wi-Fi connection,
the Wi-Fi light indicator will stop
pulsing and turn solid.
2
Return to Philips Sound App to name
the device.
Settings
Solid
EN
17
Advertisement
Table of Contents
