Table of Contents
Advertisement
Advanced
This setting enables users to configure advanced wireless settings.
Figure 19.
Beacon Interval: Type the beacon interval in the text box. Users can specify a value from 20 to
1000. The default beacon interval is 100.
RTS Threshold: Type the RTS (Request-To-Send) threshold in the text box. This value
stabilizes data flow. If data flow is irregular, choose values between 256 and 2432 until data
flow is normalized.
Fragmentation Threshold: Type the fragmentation threshold in the text box. If packet transfer
error rates are high, choose values between 1500 and 2346 until packet transfer rates are
minimized. (NOTE: set the fragmentation threshold value may diminish system performance.)
DTIM Interval: Type a DTIM (Delivery Traffic Indication Message) interval in the text box.
Users can specify a value between 1 and 255. The default value is 1.
TX Rates: Select one of the wireless communications transfer rates, measured in megabytes
per second, based upon the speed of wireless adapters connected to the WLAN.
Antenna Transmit Power: Adjust the power of the antenna transmission by selecting from the
drop down list: full, half (-3dB), quarter (-6dB), eighth (-9dB) or min.
16
Advertisement
Table of Contents
