9. IMPORTANT: To avoid damaging the
Crossbar (93), do not use power tools and do
not overtighten the #10 x 3/4" Screws (9).
Orient the Crossbar (93) as shown. Tighten all
four #10 x 3/4" Screws (9) about halfway into
the Handrails (87, 88). Slide the Crossbar as far
forward as possible, and then tighten the four
Screws.
10. Attach the Console Frame (104) to the Handrails
(87, 88) with four 5/16" x 1 1/2" Bolts (4) and four
5/16" Star Washers (11). Start all four Bolts,
and then tighten them.
9
9
10
104
11
4
11
9
93
88
11
4
88
87
87