Table of Contents
Advertisement
USBRECORDING
Programmesettingforrecord-
ing
...withelectronicprogrammeguide
Electronic programme guide data can be used
for recording.
25 EPG reminder and/or recorder can be set
in total.
1
Press »GUIDE« to open the electronic
programme guide.
2
Select the preferred TV program with »
or »
«.
Λ
– I nformation about the actual TV program
is displayed.
<
>
3
Press »
« or »
« to select the TV program
you want to record.
4
To add broadcasts to the timer press »OK«.
– I nformation for the TV program to be
recorded will be displayed.
5
Select the line »Record« with »
»OK« to confirm.
– R ecording data range appears.
6
Press »OK« to confirm.
7
Press »EXIT« to end the menu.
Note:
If the data for the recording is to be
7
changed, open menu with »MENU«. Select
the menu item »Schedule List« with »
<
>
»
«, »
« or »
Λ
Press »
« (green), change the data and
and save it with »
Notes:
A warning is displayed before the timer
7
recording starts and counts down for 10 sec-
onds to allow you to switch to the channel.
At the end of 10 seconds, the channel to be
recorded appears automatically.
If the timer recording starts during play-
7
back, playback stops. If you do not select
»Yes« in the warning prompt, recording
will start automatically at the end of the
countdown.
44
ENGLISH
-------------------------------------------------------------------------------------------
>
« and press
V
« and confirm with »OK«.
« (blue).
Only for UPC customers Note: Parts of
7
previous or next files can be included into
the record while the programme is being
recorded resulting from possible Programme
Guide errors. In such cases, keep in mind
that the highest family protection level will
apply for the whole recording if one or more
of those programmes have any level of fam-
ily protection.
Setthelead/follow-uptime
With this function you can change the recording
«
V
time set by the electronic TV guide.
If you think that a program will start a few min-
utes earlier or will end several minutes later, you
can „add" up to 60 minutes to this time
1
Open the menu with »MENU«.
2
Select the menu item »Schedule List« with
»
«, »
V
Λ
confirm.
3
Activade the »Padding Time« menu with
»
« (blue).
4
Change the start time with »
5
Use »
V
change the end time with »
6
Select push button »Save« with »
press »OK« to confirm.
7
Press »EXIT« to end the menu.
«,
<
>
«, »
« or »
« and press »OK« to
<
« to switch to the line »End« and
<
« or »
>
« or »
«.
>
«.
« and
V
Advertisement
Table of Contents
