Samsung NV7B403 C Series User & Installation Manual page 34

Maintenance
Catalytic enamel surface (applicable models only)
The removable parts are coated with dark grey catalytic enamel. They can be
soiled with oil and fat spattered by the circulating air during convection heating.
However, these impurities burn off at oven temperatures of 200 °C or above.
1. Remove all accessories from the oven.
2. Clean the interior of the oven.
3. Select Convection mode with max temperature, and run the cycle for an hour.
Door
Do not remove the oven door unless for cleaning purposes. To remove the door for
cleaning, follow these instructions.
WARNING
The oven door is heavy.
34 English
FULL_NV7B4025ZAK_U4_DG68-01419D-00_EN.indd 34 FULL_NV7B4025ZAK_U4_DG68-01419D-00_EN.indd 34
1. Open the door and flip open the clips at
both hinges.
2. Close the door approximately 70°. Hold
the oven door by the sides using both
hands, and lift and pull upwards until the
hinges are removed.
3. Clean the door with soapy water and a
clean cloth.
4. When done, follow steps 1 to 2 above in
Door glass
Depending on the model, the oven door is equipped with 3-4 sheets of glass
placed against each other. Do not remove the door glass unless for cleaning
purposes. To remove the door glass for cleaning, follow these instructions.
1. Use a screwdriver to remove the screws
2. Detach the coverings in the arrow
3. Remove the first sheet from the door.
01
the reverse order to reinstall the door.
Make sure the clips are hinged on both
sides.
on the left and right sides.
directions
2022-09-08 오후 3:42:38 2022-09-08 오후 3:42:38