Table of Contents
Advertisement
18. Materials – Cautions for Use
Removing dirt on the image sensor
The image sensor is very precise and delicate, so be sure to observe the
following when you do have to clean it yourself.
•
Blow dust off the surface of the image sensor using a commercially available blower.
Do not blow the dust off with excessive power.
•
Do not put the blower further inside than the lens mount.
The blower can scratch the image sensor if it touches.
•
Do not use any objects except a blower to clean the image sensor.
•
If you cannot remove the dirt or dust with the blower, consult the dealer or
Panasonic.
Cleaning the Viewfinder
If the viewfinder is dirty, then remove the eye cup and clean.
Blow dirt off the surface of the viewfinder using a commercially available
blower, then lightly wipe with a soft, dry cloth.
•
After cleaning, attach the eye cup.
•
Be careful not to lose the eye cup.
753
Advertisement
Table of Contents
