Table of Contents
Advertisement
Quick Links
OWNER'S MANUAL
Safety and Reference
Please read this manual carefully before operating your set and retain it for future
reference.
*MFL71753603*
(2103-REV01)
Questo manuale d'istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per
(OLED77G16LA)
o cerca il tuo prodotto tra le
migliori offerte di Televisori
Copyright © 2021 LG Electronics Inc. All Rights Reserved.
LG OLED G1 77"
www.lg.com
Advertisement
Table of Contents
Related Manuals for LG OLED77G16LA
Summary of Contents for LG OLED77G16LA
- Page 1 Televisori OWNER’S MANUAL Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. *MFL71753603* www.lg.com (2103-REV01) Copyright © 2021 LG Electronics Inc. All Rights Reserved.
-
Page 2: Before Reading This Manual
Title Warning! Safety instructions Connections Preparing Troubleshooting - Lifting and moving the TV Specifications - Mounting on the Table - Mounting to the Wall - Open Source Software Notice Information - Antenna/Cable - Licenses - Satellite dish Precautions for Protecting the OLED TV Starting TV Screen... - Page 3 Warning! Safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
- Page 4 • Use only an authorized attachments / accessories approved storm. You may be electrocuted. by LG Electronics. Otherwise, this may result in fire, electric • Make sure the power cord is connected securely to the TV and shock, malfunction, or product damage.
- Page 5 • Batteries - Store the accessories (battery, etc.) in a safe location out of the reach of children. - Do not short circuit, disassemble, or allow the batteries to overheat. Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat. - Caution : Risk of fire or explosion if the battery is replaced by an incorrect type.
-
Page 6: Lifting And Moving The Tv
Preparing Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. • It is recommended to move the TV in the box or packing material that the TV originally came in. •... - Page 7 Mounting on the Table 1 Lift and tilt the TV into its upright position on a table. • Leave a 10 cm (minimum) space from the wall for proper ventilation. 2 Connect the power cord to a wall outlet. 10 cm (Depending on model) •...
- Page 8 Securing TV to the Wall 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. • If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.
-
Page 9: Mounting To The Wall
LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. -
Page 10: Precautions For Safety
For more information, watch the installation video on your smart device. Precautions for Safety (Except for OLW480B) • Professional installers should read this manual carefully to ensure proper installation. • Professional installers should forward this manual to customers after installation and encourage them to read and store it in a convenient place for future reference. -
Page 11: Before Installation
• Install the product only on a vertical wall. Do not install on a tilted wall that exceeds building standards or on the heavily titled wall or ceiling. LG is not responsible for problems caused by improper installation of the product, e.g., heavily tilted walls and ceilings. - Page 12 • Check the enclosed accessories before installation. We are not responsible for any lost or damaged accessories after the inner packaging is opened. • When an infant or small child swallows the enclosed accessories, various safety accidents such as choking may occur. Keep the enclosed accessories out of the reach of infants and children.
- Page 13 For installation on concrete wall 1 Drill holes in anchor locations with a drill bit of Ø 8 mm to a depth of 80 mm to 100 mm. 2 Clean the drilled holes. 3 Insert the enclosed anchors for fixing the wall mount into the holes. (Use a hammer when inserting anchors.) Wall mounting anchor 4 Push the wall mount support closely toward the wall to match the hole locations.
-
Page 14: After Installation
After Installation • When connecting additional cables from the sides, we recommend holding the centre of the TV horizontally or vertically and pulling the product to make sure there is sufficient distance from the wall before connecting. • When connecting additional cables from the bottom, we recommend releasing the TV from the wall mount before connecting. •... -
Page 15: Turning On The Tv
Starting TV Turning on the TV You can simply operate the TV functions, using the button. Using button Power On (Press) 1) All running apps will close, and any recording in progress will stop. (Depending on country) Power Off (Press and Hold) 2) You can access and adjust the menu by pressing the button when TV is on. -
Page 16: Inserting The Battery
Inserting the battery When the message [Magic Remote battery is low. Please change the battery.] is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching the ends to the label inside the compartment, and close the battery cover. •... - Page 17 NFC is technology that uses Near Field Communication, allowing you to conveniently send and receive information without separate settings. By bringing a smart device near the NFC-enabled remote control, you can install the LG ThinQ app and connect the device to the TV.
-
Page 18: Using Remote Control
Using Remote Control Using Magic Remote Control (Depending on model) The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. Number buttons Enters numbers. Power Turns the TV on or off. Accesses the [Quick Help]. - Page 19 Connections Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. • When connecting the HDMI cable, the product and external devices should be turned off and unplugged. HDMI •...
-
Page 20: External Devices
IR Blaster Control the set-top box (cable/satellite/IP/OTT), Blu-ray/DVD player, soundbar, game consoles, etc., using the IR Blaster. (Depending on country) • Connect the IR Blaster cable to the TV’s IR Blaster port. Note • Place both ends (one or two) of the IR Blaster in front of the external device as shown in the picture below. →... -
Page 21: Troubleshooting
Troubleshooting • Check the remote control sensor on the product and try again. Cannot control the TV with the remote • Check if there is any obstacle between the product and the remote control. control. • Check if the batteries are still working and properly installed ( to , to ). -
Page 22: Specifications
Specifications (Depending on country) Broadcasting Specifications Digital TV Analogue TV PAL B/B, PAL B/G, PAL D/K, PAL-I, Television system DVB-T/T2, DVB-C, DVB-S/S2 SECAM B/G, SECAM D/K, NTSC-M DVB-S/S2 DVB-C DVB-T/T2 VHF III : 174 ~ 230 MHz UHF IV : 470 ~ 606 MHz Programme coverage 46 ~ 862 MHz 950~2,150 MHz... - Page 23 Wireless module(LGSBWAC95)Specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency range Output Power (Max.) 2,400 to 2,483.5 MHz 19 dBm 5,150 to 5,725 MHz 18 dBm 5,725 to 5,850 MHz 13.5 dBm Bluetooth Frequency range Output power(Max.) 2,400 to 2,483.5 MHz 9 dBm As band channels can vary per country, the user cannot change or adjust the operating frequency.
-
Page 24: Open Source Software Notice Information
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. - Page 25 Precautions for Protecting the OLED TV Screen Unlike regular LED/LCDs, OLED TVs produce images that emit light for each pixel, achieving a perfect black colour and delivering clear images without blurring. Due to the nature of the organic materials used to achieve high-resolution image quality, OLED displays generally experience image retention on the screen, which can be a persistent phenomenon.
- Page 26 Recommendations for Minimising Image Retention → [Picture] → [Select Mode] and set the mode When watching the TV for a long time, press the button on the remote control, go to to [Eco], go to [Advanced Settings] → [Brightness] and set [OLED Pixel Brightness] to a lower level. In addition, press the button on the →...
- Page 27 The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. Model Serial No.