Advertisement
TO
ATTACH JUMPER
CABLES
-
• Connect
each end of the RED cable to
the POSITIVE
(+) terminal
of each bat-
tery, taking care not to short against
chassis.
o Connect
one end of the BLACK
cable to
the NEGATIVE
(-) terminal
of fully
charged
battery.
° Connect
the other end of the BLACK
cable to good CHASSIS
GROUND,
away from fuel tank and battery.
TO REMOVE
CABLES,
REVERSE
ORDER
-
o Remove
BLACK
cable first from chassis
and then from the fully charged
battery.
o Remove
RED cable last from both bat-
teries.
Positive Terminal
Negative Terminal
TO REPLACE
HEADLIGHT
BULB
o Raise hood,
o Pull bulb holder out of the hole in the
backside of the grill.
,
Replace bulb in holder and push bulb
holder securely
back into the hole in the
backside of the grill,
o Close hood.
iNTERLOCKS AND RELAYS
Loose or damaged wiring may cause your
tractor to run poorly, stop running, or pre-
vent it from starting,
o Check wiring. See electrical wiring dia-
gram in the Repair Parts section of this
manual.
TO REPLACE
FUSE
Replace
with 30 amp automotive-type
plug-in fuse. The fuse holder is located
behind the dash.
Positive Terminal
Battery
Negative Terminal
26
Advertisement
