Table of Contents
Advertisement
NZ AU
11.4 Moving the appliance
If the machine is to be moved to a distant location, replace the transportation bolts removed
before installation to prevent damage: The assembly takes place in reverse order.
11.5 Aligning the appliance
Adjust all feet (Fig. 11-7) to achieve a complete level position. This will minimize vibra-
and thus noise during use. It will also reduce wear and tear. We recommend to use
tions
a spirit level for adjustment. Floor should be as stable and flat as possible.
1. Loose the locknut (1) by using a wrench.
2. Adjust the high by turning the foot (2).
3. Tighten lockut (1) against the housing.
11-7
11-Installation
27
Advertisement
Table of Contents
