Hardware Installation - TRENDnet TW100-BRV204 Quick Installation Manual

2. Hardware Installation

Note: Gather all information related to your Internet Connection before you
start. If necessary, contact your Internet Service Provider (ISP).
1. Verify that you have an Internet
connection when connecting your
computer directly to the Cable or
DSL modem.
2. Connect one end of a RJ-45 cable
to the TW100-BRV204's WAN
port. Connect the other end of the
cable to your modem.
3. Connect one end of a RJ-45 cable
to one of the TW100-BRV204's
LAN ports. Connect the other end
of the cable to the computer's
Ethernet port.
4. Connect the AC Power Adapter to
the TW100-BRV204 and then to a
power outlet.
5. Verify that the following panel lights
are on: Power, LINK/Act and
WAN.
Internet
2
English
Cable/DSL Modem