Table of Contents
Advertisement
profiles and use it to connect to the network. To add a new profile into the Auto Selected
Profiles list, please follow these steps.
1.
On the Profile Management screen (shown in
2.
The Auto Profiles Selection management window will appear (shown in
list of all created profiles in the Available Profiles.
3.
Highlight the profiles to add to auto profile selection, and click Add. The profile will appear
in the Auto Selected Profiles box.
4.
Highlight a profile in the Auto Selected Profiles box.
5.
Click Move Up or Move Down as appropriate.
Note:
The first profile in the Auto Selected Profiles box has highest priority, while the last profile has the
lowest priority.
6.
Click OK.
7.
Check the Auto Select Profiles checkbox on the Profile Management tab (shown in
F igure 3-2).
8
Note:
When auto profile selection is enabled by checking Auto Select Profiles on the Profile
Management tab, the client adapter will scan for an available network. The profile with the
highest priority and the same SSID as one of the found networks will be used to connect to the
network. If the connection fails, the client adapter will try the next highest priority profile that
TL-WN821N
F igure 3-2), click Order Profiles....
8
Figure 3-11
20
Wireless N USB Adapter
F igure 3-11) with a
8
Advertisement
Table of Contents
