TP-Link TL-WN610G User Manual page 22

TL-WN610G/TL-WN650G/TL-WN651G
configuration profile, select the configuration from the Profile list and click Modify.
The Profile Management dialog box will display a screen similar to that shown in Figure 3-4.
1. Edit the General tab
Profile Name - Identifies the configuration profile. This name must be unique. Profile
names are not case-sensitive.
Client Name - Identifies the client machine.
Network Names (SSIDs) - The IEEE 802.11 wireless network name. This field has a
maximum limit of 32 characters.
2. Edit the Security tab
Edit the fields in the Security tab of Profile Management to configure the profile. To define the
security mode, select the radio button of the desired security mode.
WPA/WPA2 - Wi-Fi Protected Access.
WPA/WPA2 Passphrase - Wi-Fi Protected Access Passphrase.
802.1x - Enables 802.1x security.
Shared Key (Static WEP) - Enables the use of shared keys that are defined on both the
access point and the station. To define shared encryption keys, choose the Shared Key
radio button and click Configure to fill in the Define Shared Keys window.
None: No security (not recommended).
Note:
If the access point that the wireless adapter is associating to has WEP set to Optional and the
client has WEP enabled, make sure that Allow Association to Mixed Cells is checked on the
Figure 3-4 General Tab of Profile Management
108M Wireless Adapter User Guide
15