TP-Link TL-WN353GD User Manual page 23

Step 1: Select the "WPA-PSK" as the Network Authentication.
Step 2: Select the "TKIP" as Data encryption.
Step 3: Enter the Network key and confirm it.
Step 4: Click the OK to save the configuration.
4. WAP2-PSK authentication
When you select the WPA2-PSK as the authentication, the available data encryptions are TKIP
and AES. Please select the one according your need.
Note:
The configuration for WPA2-PSK and WPA-PSK are similar, you can refer to WAP-PSK
authentication to configure it.
5. WPA 802.1x
When you select the WPA 802.1x as the authentication, the available data encryptions are TKIP
and AES. For the authentication, you should configure the 802.1x security. Select the EAP Type
and configure the corresponding options.
TL-WN353GD 54M Wireless PCI Adapter User Guide
Figure 3-8
18