Table of Contents
Advertisement
User Name - Enter the user name for 802.1X authentication provided by your ISP
Password - Enter the password for 802.1X authentication provided by your ISP.
Click Login to start 802.1X authentication.
Click Logout to end 802.1X authentication.
IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.
Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP.
Default Gateway - (Optional) Enter the default gateway IP address in dotted-decimal
notation provided by your ISP.
6.
If you choose Big Pond Cable, you should enter the following parameters (Figure 4-10):
TL-WR642G
Figure 4-9 802.1X + Static IP Settings
21
108M Wireless Router User Guide
Advertisement
Table of Contents
