Advertisement
HOWTO SET UP YOUR LAWN
MOWER
TO UNFOLD
HANDLE
IMPORTANT:
Unfold handle carefully so
as not to pinch or damage control cables.
• Raise lower handle section to operating
position and squeeze
the bottom ends
of lower handle towards each other
until the pin in handle can be inserted
into one of the throe height adjustment
holes.
• Remove protective padding,
raise
upper handle section into place on
lower handle and tighten both handle
knobs.
• Remove any packing material from
around control bar.
• Your handles may be adjusted for your
mowing comfort.
Refer to Service and
Adjustments
section of this manual.
Operator
presence
Control bar
handle
Liftup
Lower
handle
Handle
pin
Mowing
posi_on
adjustment
/bracket
TO INSTALL ATTACHMENTS
Your lawn mower was shipped ready to
be used as a mulcher. To convert to
bagging or discharging, see =To convert
moweP in the OPERATION section of thi,,
manual.
5
Advertisement
