Table of Contents
Advertisement
S32F351FU*
If either side of the bracket to purchase P0 or P1 is longer than 115.0 mm, the
bracket will interfere with the Stand Hinge Part. If this is the case, the wall
mount should not be used.
Refer to the area
in the image
― The dimensions of this model required by VESA are 75.0 x 75.0 mm. Please purchase the wall-mount tailored to the dimensions of 75.0 x 75.0 mm.
― If you use a wall-mount used for the dimensions of both 100.0 x 100.0 mm and 75.0 x 75.0 mm, please ensure that its external dimensions are less than 115.0 x 115.0 mm.
― Some wall-mounts with special shapes and with their dimensions being greater than 115.0 x 115.0 mm may be unusable.
P1=115.0 mm
75.0 mm
Stand Hinge Part
18
Advertisement
Table of Contents
