Ti-83 Link - Texas Instruments TI-83 Manual Book

TI-83 LINK

TI-83 Link
Capabilities
Linking Two
TI-83s
Linking a TI-82
and a TI-83
Connecting Two
Calculators with
the Cable
Linking to a CBR
or the CBL 2/CBL
System
Linking to a PC
or Macintosh
The TI-83 has a port to connect and communicate with
another TI-83, a TI
(CBL 2é, CBLé) System, the Calculator-Based Rangeré
(CBRé), or a personal computer. The unit-to-unit link
cable is included with the TI-83. This chapter describes
how to communicate with another calculator.
You can transfer all variables and programs to another
TI-83 or backup the entire memory of a TI-83. The
software that enables this communication is built into the
TI-83. To transmit from one TI-83 to another, follow the
steps on pages 19
.
You can transfer from a TI
programs. Also, you can transfer from a TI-83 to a TI
through .
L L
1 6
The software that enables this communication is built into the
TI-83. To transmit data from a TI
steps on pages 19 . 6 and 19
You cannot perform a memory backup from a TI
TI-83.
The only data type you can transmit from a TI-83 to a
TI 82 is list data stored in
-
menu item
SEND
1. Insert either end of the cable into the port very firmly.
2. Insert the other end of the cable into the other
calculator's port.
CBR and the CBL 2/CBL System are optional accessories
that connect to a TI-83 with the unit-to-unit link cable.
With a CBR or a CBL 2/CBL and a TI-83, you can collect
and analyze real-world data.
é is an optional accessory that links a TI-83
TI.GRAPH LINK
to enable communication with a personal computer.
82, the Calculator-Based Laboratoryé
-
6 and 19 7.
.
82 to a TI-83 all variables and
-
82 to a TI-83, follow the
-
. 7.
through
L
1
(page 19
5:Lists to TI82
Communication Link 19-3
82 lists
-
82 to a
-
. Use the
L
LINK
6
. 8).