Texas Instruments TI-83 Plus User Manual page 14

Window and Zoom Settings
CONIC WINDOW
The
CONIC WINDOW
window characteristics. This screen is similar to the calculator's
window settings screen. You can change individual window
parameters as needed.
1. Make sure that the conic graphing type mode is set correctly
(to function, parametric, or polar, depending on what the
equation requires).
2. Make sure the window settings mode is set to
3. Select a conic section from the
ELLIPSE
4. Select an equation.
Note
5. Set the parameters (for example, provide
first circle equation in function mode).
TI-83 Plus Conic Graphing
settings screen allows you to modify the
,
HYPERBOLA
You can only access the CONIC WINDOW screen after you
have selected an equation to graph.
You can only access the CONIC WINDOW screen if the mode
is set to MAN.
CONICS
, or
PARABOLA
.
MAN
main menu:
.
, , and
H K
,
CIRCLE
for the
R
Page 14