Advertisement
Getting Started
Installing the Paper Roll
1. Remove the printer compartment cover.
2. Lift the paper holder so that it extends behind the printer compartment.
3. Remove any packing materials from the printer compartment.
4. Replace the printer compartment cover.
5. Make sure the calculator is plugged into an electrical outlet.
6. Set the power switch on the right side of the calculator to on
7. Place the paper roll on the paper holder.
8. Cut any jagged edges off the end of the paper.
9. Insert the end of the paper into the paper slot as shown. To avoid paper
jams, use quality bond paper.
10. While feeding the paper into the slot, press and hold &.
To prevent damaging the printer (which may void the warranty), when
Note
operating the calculator without paper, move the
Replacing the 2-Color Ink Ribbon
1. Remove the paper roll and press & to run out any remaining paper.
2. Set the power switch on the right side of the calculator to off ( S ).
3. Remove the printer compartment cover.
4. Lift each ribbon spool until the ribbon is clear of the printer.
5. Lower the new ribbon (
press down until it snaps into place.
red side on the bottom
1
( P )
switch to
PRINTER
) into the compartment and
.
.
OFF
Advertisement
