Key Descriptions - Texas Instruments TI-5045SV User Manual

TAX SET
CALC
Ex.
Setup:
Move and hold the TAX switch to SET. Press
automatically returns to CALC. 17.5% is printed.
Press
100 !
Note: The most common setup is POWER: PRT, ROUND: 5/4, DECIMAL: 2, TAX: CALC. Use these
positions for the examples unless other settings are given.
Basic keys
Clear Entry: Clears an entry, enabling you to enter another number in its place. Note
that this key does not clear the add register.
Clear Key: Clears the add register, any pending operations, and the display. 0.C is
printed. Does not clear the memory.
Right Shift: Deletes the right-most digit entered from an entry before an operation key is
pressed. Shifts the remaining digits one place to the right.
Decimal Point: Enters a decimal point.
Date/Non-Add: Prints a date (such as 12¦10¦96) or a number for reference purposes.
Does not affect calculations. This entry is printed on the left side of the printout, the date
or number preceded by the # sign.
Paper Advance: Advances the printing paper.
Addition and subtraction keys
Add: Adds a number to the add register. Displays the cumulated result.
Subtotal: Gives the intermediate total from the add register. Using this key does not
affect the contents of the add register.
Subtract: Subtracts a number from the add register. Displays the cumulated result.
Total: Gives the total from the add register, and then clears the register.
Lets you enter a tax rate to perform tax calculations.
Stores the tax rate. Pressing ! or " after a tax rate has been entered,
adds/subtracts the stored tax rate to/from the value in the display.
VAT = 17.5 %
100 + VAT
PRINTER: PRT, DECIMAL: F, ROUND: 5/4, TAX: CALC
Display
2
0.
117.5

KEY DESCRIPTIONS

Ex.
17 L 5 and release the TAX switch. It
Printout Press
0 ¦ C
100 ¦ 235 "
17 ¦ 5 @
117 ¦ 5 …
3
VAT = 17.5 %
235 – VAT
Display
2
0.
200.
Printout
0 ¦ C
235 ¦
N35 ¦ @
200 ¦ …