Switches; Key Descriptions; Power; Round - Texas Instruments TI-5032SVC Owner's Manual

ENG (English)

Switches

POWER

The calculator is turned off.
OFF
Calculations are displayed but not printed.
ON
Calculations are displayed and printed.
PRT
IC Both the printer and item counter are active.
To clear the item counter, press Y.

ROUND

5/4 Results are rounded to the selected
setting. For example, if you set
2.349 is rounded to 2.35.
( Results are rounded down (truncated) to the
selected setting. For example, if you
DECIMAL
set to , 2.349 is rounded to 2.34.
DECIMAL 2
DECIMAL
(add mode) Lets you enter values with two
+
decimal places without pressing L. For
example, key in 5321 to enter 53.21.
(floating decimal) Varies the number of decimal
F
places.
0 (fixed decimal) Shows 0 decimal places.
(fixed decimal) Shows 2 decimal places.
2
TAX
Lets you enter the tax rate. You cannot perform
SET
calculations if TAX=SET .
Lets you perform calculations.
CALC

Key Descriptions

&
Paper Advance. Advances the paper without
printing.
%
Right Shift.
/
Date or Number.
without affecting calculations. For example, to enter
the date December 12, 1998, key in
12 L 12 L 98 /.
!
Change Sign.
displayed value.
>
Divide.
DECIMAL
value entered.
to ,
DECIMAL 2
3
Equals.
division, or # operation. Does not add the result
to the currently accumulated total.
?
Multiply.
value entered.
2
Clear Entry/Clear.
entry, letting you enter another number in its place.
When pressed twice, clears an overflow condition.
L
Decimal Point.
.
Subtract.
currently accumulated total; completes a
percentage discount calculation.
9
Add. Adds the displayed value to the currently
accumulated total; completes a percentage add on
calculation.
P Add Tax. Calculates the tax, using the stored tax
rate, and adds it to the pretax amount (the
displayed value).
Deletes the last digit you entered.
Prints a reference number or date
# 12.12.98 is printed.
Changes the sign (+ or –) of the
Divides the displayed value by the next
Completes any pending multiplication,
Multiplies the displayed value by the next
When pressed once, clears an
Enters a decimal point.
Subtracts the displayed value from the
Q
Calculates the tax to be deducted
Subtract Tax.
(using the stored tax rate) and subtracts it from the
displayed value to find the pretax amount.
>
Interprets the displayed value as a
Percent.
percentage; completes a multiplication or division
operation.
#
Calculates the selling price
Gross Profit Margin.
and profit or loss on an item when its cost and
gross profit or loss margin are known.
X
Displays and prints the currently
Subtotal.
accumulated total, but does not clear it.
Y
Displays and prints the currently
Total.
accumulated total, and then clears the total; resets
the item counter to zero.
0
Displays and prints the value in
Memory Total.
memory, and then clears the memory. Also clears
the M indicator from the display and resets the
memory item count to zero.
;
Displays and prints the value in
Memory Subtotal.
memory, but does not clear the memory.
F
Subtracts the displayed
Subtract from Memory.
value from the memory. If a multiplication or
division operation is pending, F completes the
operation and subtracts the result from memory.
N
Adds the displayed value to the
Add to Memory.
memory. If a multiplication or division operation is
pending, N completes the operation and adds
the result to memory.
ENG (English) 5