Advertisement
6).Repeat step 2—5 until both of the value of color coordination of
white and grey equal to (X=0.270 +/-0.015;Y=0.290 +/-0.015).
For COOL and WARM color temperature, just repeat step 2—5.The color
coordination we recommend for COOL and WARM color temperature is
respectively(X=0.270 +/-0.015;Y=0.270 +/-0.015) and
(X=0.300 +/-0.015;Y=0.305 +/-0.015).
After the adjustment of HDMI1, you can switch to other source AV, PC
and YPbPr and repeat step 1—6 to do the WB adjustment.
Note: For some small size LED panel,the color coordination of
specifications is not X=0.270/Y=0.290,and we recommend you adopt the
values from panel specifications.
5.5. ADC Calibration and White Balance Adjustment (automatic)
The process of adjusting White Balance automatically is out of the
range of this file, Please refer to the relevant technical file of HuiZhou
factory of TCL.
6.Chip list of software programming before SMT
Following chips must be programmed before SMT by tools
Position
Chip type
U301
MT29F2G08ABAEA
7.Software update
Method of SW update:
1） Download the bin file to the root directory of your USB device (Do
not change the file name); Then insert the USB device to USB interface
of TV set.
MS08GPSeries with its upgrade file corresponding relation as thetable
below show:
Sales
Chassis Name
area
MS08GP
LA
2）Appendix
"How to upgrade SW FLASH using Mstar tool"
See Appendix
"How to upgrade MBOOT using USB"
Appendix
"How to upgrade FLASH SW using USB"
Copy the SW BIN image "MS08GP_MBOOT.bin" into USB stick root path.
Note: If there's already other "MS08GP_MBOOT.bin" into USB root, it needs to be deleted
Software description
HDMI HDCP Key, System Software
Upgrade filename
MS08GP_MAIN.bin
etc.
Remark
DVB-T2
Advertisement
