Features - Sylvania LC260SS2 Owner's Manual

18
Channel List
The channels selected here can be skipped when selecting the
channels using CH + / −.
Those channels can still be selected with the Number buttons.
1
Use ▲/▼ to select [Channel List], then press OK.
2
Use ▲/▼ to select the channel you want to remove, then
press OK.
Picture
Sound
Setup

Features

Language
• The channel display for the removed channel darkens.
You will not be able to select the channel again using
CH + / −.
• To reactivate a removed channel, use ▲/▼ and press
OK. The registered channels are highlighted.
• When you remove a main channel, its subchannels are
removed as well.
Note
• The channel with the [DTV] indicated on the display is ATSC.
Otherwise the channel is NTSC.
Add Channels
This function lets you add the off the air along NTSC or analog
Cable channels that were not added by the autoprogram due
to reception conditions at the initial setting.
1
Use ▲/▼ to select [Add Channels], then press OK.
2
Use the Number buttons to enter the number of the
channel you want to add, then press OK.
Picture
Sound
Setup
Features
Language
Note
• If setup completes successfully, [Added to the channel list.] is
displayed.
• If external input is used, it is not possible to register the channel
and [Unavailable] will be displayed on the TV screen.
• By using CH + / −, you can select the memorized channels only.
Channel List
DTV
DTV
Highlight channels for
Ch Up / Down key selection.
DTV
DTV
Ch Select Watch / Skip
Add Channels
Add Channels
For analog channels, select a
channel to be added using
number keys.
For digital channels, you must
perform Autoprogram function.
Ch Change Back
Antenna Confi rmation
ATSC
This function lets you check the digital signal strength of each
channel.
1
Use ▲/▼ to select [Antenna], then press OK.
2
Use the Number buttons or CH + / − to select the channel
for which you want to check the digital signal strength.
6.1
8.1
9
Picture
27
48.1
Sound
58
67.1
Setup
Back
Features
Language
Note
• If the channel is set to analog channel or external input, you
cannot confi rm the antenna condition.
Features
1
Use ▲/▼ to select the item you want to adjust, then press
OK.
Picture
Sound
Setup
Features
Language
11
2
Adjust the following items.
Closed Caption
You can view closed captioning (CC) for TV programs,
movies and news. Closed caption refers to text of dialog or
descriptions displayed on-screen.
Use ▲/▼ to select [Closed Caption], then press OK.
See the following description for setting each item.
Antenna
Back
Current 50 Max 50
Ch Change
Features
Closed Caption
Child Lock
fun-Link (HDMI CEC)
Energy Saving Mode On
Location Home
Current Software Info
11.1