Stereo-Link Tm : Syncing Between Two Speakers - ION SPORT BOOM User Manual

Stereo-Link TM : Syncing Between Two Speakers
To sync audio between two Sport
Note: When you begin the Stereo-Link
automatically disconnected. You can also disconnect your device prior to beginning by
double-pressing the Bluetooth button.
1. Press and hold the Stereo-Link
will be heard and the Stereo-Link
flashing while attempting to link. Please allow 10 to 30 seconds for the speakers to link.
Note: Speakers should be within 50' (15 m) of each other to properly link. The closer the
speakers are, the faster they will link.
Note: To exit Stereo-Link
Once the speakers are linked, the Stereo-Link
and the Bluetooth icons will flash to indicate it is searching for a device to pair with.
2. Select which unit will be the "primary" speaker by pressing and releasing the Bluetooth
button on that unit.
3. Navigate to your device's Bluetooth settings menu and select SPORT BOOM to connect.
When the connection is successful, you will hear "Bluetooth Connected" from the primary
speaker (if voice prompts are enabled). When Bluetooth audio playback begins, you should
hear it through both speakers. The primary speaker will play the left channel while the
secondary speaker plays the right channel. Playback controls are active on both speakers.
Note: Radio, Aux, and USB modes will be disabled when Stereo-Link
ION Audio Sport™ Boom User Guide
1 - PRESS & HOLD
(speaker 1)
2 - PRESS
(primary speaker)
TM Boom speakers:
TM button on each Sport
TM
TM mode, double-press the Stereo-Link
1 - PRESS & HOLD
TM process, any connected Bluetooth devices will be
TM
and Bluetooth icons in each unit's display will begin
TM icons on both speakers will be lit solidly,
(speaker 2)
SPORT TM BOOM
3
Boom speaker. A beeping sound
TM button again.
TM is active.
12