Technical Specifications - Siemens SIMATIC NET ANT897-1NY Compact Operating Instructions

Note
Antenna power
The antenna was developed specifically for installation on a non-conductive surface. Installation on a metallic or conductive
surface impairs the antenna performance.
To avoid impairing proper operation, you should not mount the antenna close to overhead or high-voltage power lines.
Keep a distance of at least 300 mm between the antenna and nearby metal objects and surfaces.
The antenna is intended for mounting on a flat surface (e.g. ceiling, vehicle roof) with a maximum thickness of 10
millimeters.
Proceed as follows to mount the antenna:
1. Remove corrosion, roughness, grease, oil, shavings and dust from the mounting surface.
2. Unscrew the nut and toothed lock washer from the base thread of the antenna.
3. Guide the connecting cables of the antenna through the mounting hole in the ceiling (19 mm diameter).
4. The antenna is equipped with an all-round seal on the base thread side, which is adhered to the mounting surface. Remove
the covering foil on this seal.
5. Guide the base thread of the antenna through the mounting hole and press the antenna housing to the mounting surface to
adhere the all-round seal to this surface. IP69K degree of protection is only guaranteed with a properly adhered seal.
6. Attach the toothed lock washer to the base thread of the antenna.
7. Screw the nut to the base thread. The maximum tightening torque is 5 Nm.
8. Connect the cables. The tightening torque at the SMA connector is 1 Nm.
4

Technical specifications

Electrical characteristics
Frequency range, GHz
Typical maximum antenna gain, dBI
Measured in open space
Characteristic
VSWR
Impedance
Polarization
Maximum transmit power
Insulation
Mechanical properties / certifications
Interfaces
Dimensions
Weight
Material
Color
Degree of protection
Operating temperature
Storage temperature
Transport temperature
Shock-resistance according to EN 62262
Silicone-free
Certifications
10
Diameter
Height
Cable length
0.7 ... 0.96 1.42 ... 1.9
1.0 2.5
Omnidirectional
< 3:1
50 Ω
Linear
5 W
> 10 dB
2 x SMA male
123 mm
32 mm
3 m
225 g
LEXAN ELX9330
Black
IP69K (with correct mounting)
-30 °C to +70 °C
-40 ℃ to +80 ℃
-40 ℃ to +80 ℃
IK10
Yes
• RoHS 2002/95/EC
• Cable flame-resistant according to
–
UN/ECE R 118.03
1.9 ... 2.7 2.7 ... 3.8
4.0 2.5
Antenna ANT897-1NY for LTE / 5G
C79000-G8900-C708-01, 07/2023
3.8 ... 4.2
3.5